Tips For Maintaining A Marble Floor After Installation

How often should I clean my marble floor? How long does it take to dry out? What kind of cleaner should I use? These questions are common for homeowners who want to keep their marble floors looking great.

Marble is a beautiful stone that adds elegance to any home or office space. Marble floors are durable and require little maintenance. 

They also look stunning. The problem is they can get dirty very easily. If you don’t properly care for them, they can become dull and unattractive.

Here are some ways to keep your marble floors looking new and fresh.

1. Cleaning Your Floors Regularly

The first step in keeping your marble floors looking good is to make sure they are cleaned regularly. This includes vacuuming the area around the baseboards as well as under the furniture legs. 

You may be tempted to use harsh chemicals on your marble floors but this will only damage the finish. Instead, try using mild soaps and warm water with a soft brush or sponge. Be careful not to scrub too hard because this could cause scratches.

2. Use Moisture-Resistant Products

To help prevent moisture from getting into the grout between the stones, add a small amount of wax to the grout lines. This helps seal the grout and prevents stains.

3. Keep Dust Out Of The Area Around The Baseboards

When the dust and dirt settle on the baseboard, it gets trapped in the joints. To avoid this, use a vacuum with high suction power. Make sure you have an extension cord handy when doing this. 

Also, if you notice dark streaks on the baseboard, try lightly rubbing it with a damp cloth. This will remove the stain.

4. Use An All-Purpose Cleaner

Use a non-acidic cleaner. It contains no ammonia or phosphates which can harm marble. Apply the cleaner directly onto the surface and let sit for 20 minutes before wiping it away with a wet rag.

5. Deep Clean When Needed

If the marble looks dull spot or has deep stains, try using a microfiber cloth dipped in a mixture of one part vinegar to three parts water. Let the mixture sit for at least 10 minutes and then wipe it off with a towel.

6. Avoid Using Acidic Cleaners

Acidic cleaners contain ingredients such as lye, sulfuric acid, and hydrochloric acid. These types of cleansers leave residue behind and can damage the surface of your marble floor tiles. Always read the label before using any type of cleaner.

7. Don’t Overuse Chemical Cleaners

While chemical cleaners do work effectively, overusing them can actually damage the surface of your tile. Try using a mix of half vinegar and half water instead.

8. Dry Clean Once In A While

Mild detergents tend to dry out the marble faster than harsher products. So, if you need a quick fix, use a dry cleaning solution spray on the spot. Wait until the next day to dry completely.

9. Use A Microfiber Cloth

A microfiber cloth is ideal for removing stubborn stains from your marble floors. Dip the cloth into an equal-sized white vinegar and water solution. Wipe the area where the stain appears and let sit overnight. Repeat the process once more the following day.

10. Keep Grime Away From The Surface

If you live in a humid climate, you might want to consider adding anti-skid pads underneath your rugs. These absorb excess moisture and help prevent dirt and grit from sticking to the bottom of your rug.

With these tips, you should find it easy to maintain your marble floors. Keep up with regular cleaning and watch how quickly they start to look their best again.

What kind of cleaning products work well with marble floors?

The cleaning products that work best with marble floors are those that don’t contain harmful chemicals. Some of the most popular options include:

1. Baking Soda

Baking soda works great for cleaning spills and removing odours. Simply sprinkle some baking soda on the spill and rub it together with a clean cloth.

2. Vinegar

Vinegar is another effective option for cleaning marble floors. Mix two parts of white vinegar and one part of warm water. Then apply the mixture to the affected area and let sit for about 15 minutes. Finally, rinse with warm water and pat dry.

3. Saltwater

Saltwater is also a good choice for cleaning marble floors. Just add a few drops of salt to a bucket of hot water and pour it over the affected area. Let it sit for 5 minutes and then scrub it off.

4. White Vinegar & Lemon Juice

This combination is especially useful when dealing with grease and grime. Simply mix equal amounts of lemon juice and white vinegar and use this mixture to clean the affected area.

5. Borax

Borax is a natural product that’s often used to remove soap scum and other hard-to-remove substances from surfaces like marble. It’s available at home improvement stores or online.

6. Laundry Detergent

Laundry detergent is a safe way to clean your marble floors without harming the finish. Simply use a small amount of laundry detergent mixed with warm water. Apply the mixture to the affected areas and let it sit for 10 minutes. Rinse thoroughly and wipe dry.

7. Dishwashing Liquid

Dishwashing liquid is another simple option for cleaning your marble floors. Simply mix 1/2 cup dishwashing liquid with 2 cups warm water. Pour the mixture onto the affected area and let it sit for 15 minutes before washing away as usual.

8. Milk

Milk is yet another effective cleaner for marble floors. Simply mix 3 tablespoons milk with 4 tablespoons white vinegar and use this solution to clean the affected area as described above.

9. Coffee Grounds

Coffee grounds can be used to clean marble floors if you’re looking for something quick and dirty. Simply place coffee grounds directly on the affected area and leave them there until they turn brown. Scrub away any remaining residue using a soft brush.

10. Toothpaste

Toothpaste is a cheap and effective alternative to commercial cleaners. Simply mix 1 tablespoon of toothpaste with 1 cup of warm water and use this mixture to wash down the affected area.

What happens if I don’t clean my marble floor after installation?

If you fail to clean your marble floors regularly, you’ll notice that they will begin to lose their shine and appear duller over time. This is because dirt and debris collect in the grooves between each piece of marble. Over time, this buildup can cause the marble pieces to stick together. Eventually, the entire surface may become covered in dust and debris.

What kind of marble flooring is recommended?

Marble is an excellent material for flooring. However, not all types are suitable for every application. Here are some things to consider:

• If you plan to install your own marble floor, make sure you purchase a type that has been prepped by a professional installer. You should avoid purchasing unfinished marble slabs, which require extensive finishing work.
• If you want to install a new marble floor, choose a slab that has been sealed with a protective coating. This prevents moisture from seeping into the natural stone and causing damage.
• If you have existing carpeting, you should look for a type of marble that won’t stain easily. Some marbles are more prone to staining than others.

What type of sealer should be used after installing the new tiles?

After installing your new marble floor, you’ll need to apply a sealant to protect the surface against stains and scratches. There are many different types of sealants available, but most contain waxes and oils. These products help prevent spills and stains from penetrating the surface. They also provide additional protection against UV rays.

How often do I need to re-apply sealant?

You should reapply your sealant at least once per year. The frequency of maintenance depends on several factors, including how much traffic the room receives, the type of sealant applied, and the environment where the floor is located.

Is it possible to remove the old sealant?

Yes, it’s possible to remove the old sealer without damaging the newly installed tile. To do so, simply scrape off the top layer of the old sealer using a putty knife or other sharp object. Then, scrub the exposed surface with a sponge or soft cloth. Once the old sealer is removed, you can apply a fresh coat of sealant.

Can I use a steam mop to clean my marble floor?

Yes, you can use a steam mop on the floor. Steam mops are designed specifically for cleaning carpets and rugs. They emit hot air and water vapour to loosen up dirt and grime. Because these machines are equipped with powerful motors, they can quickly dry out a wet floor.

How often should I vacuum my marble floor?

Vacuuming your marble floor isn’t necessary. In fact, vacuuming can actually scratch the surface of the stone. Instead, try sweeping your floor with a broom or push broom. Make sure to keep the bristles away from the edges of the tile.

 

Maintaining marble floors after installation is very important. It helps to maintain its beauty and longevity. Our team can help you in maintaining your marble floors. 

We offer services like sealing, polishing, cleaning, etc. Don’t hesitate to contact us if you need any assistance. You can call us on 0481 216 083. We’re happy to assist you!